Dear user. You can follow the steps below (this is a general method, please refer to the product manual for specific methods):
- Devices with a reset button: Firstly, make sure the device is powered off for more than 10 seconds before powering on the device. Then long press the reset button on the device for about 5 seconds (for switch devices, the reset button is mostly the switch Button itself). Wait a few moments until the indicator light starts blinking rapidly. The device enters the pairing mode. You can add it now.
- Lighting equipment: Firstly, make sure the device is powered off for more than 10 seconds before powering on the device. Then turn on and off three times (on-off-on-off-on) power of the device (2 to 4 seconds between each on and off). Wait a few moments until the lighting starts blinking rapidly. The device enters the pairing mode.You can add it now.
Note: Zigbee devices do not support individual sharing, only sharing by adding family members.