1. Tap the device in the device list to enter the device's control panel.
2. Tap the button in the upper right corner to enter the device editing page.
3. Tap to remove the required device from the devices list. Note that the automation and tap-to-run scenes associated with this device will become invalid.
4. You can also reset the status of the net-pairing module to remove the device from your device list.
5. After removing the device, you need to reset the device to pairing mode, and then re-configure the network; after the sub-remote learned under the universal remote control is removed, you must learn one by one in the universal remote control again.

Note: to associate device such as a smart camera, video doorbell, or smart door lock with another account, you must remove it from the original account.