- Click the plus sign in the top right corner of the App's homepage, then select "Add Device" to enable this feature.
- Ensure the device is powered on, and reset it to pairing mode following the instructions in the product manual. Typically, devices that are not yet paired will automatically enter this state upon initial power-up.
- If automatic discovery is unsuccessful, you can manually add the device.
Here are some common methods for putting devices into pairing mode for reference. Please refer to the product manual for precise instructions:
Bluetooth Devices: Ensure the device is powered off for over 10 seconds, then power it back on. Press and hold the reset button on the device for about 5 seconds until the device indicator light starts flashing, indicating the device is in pairing mode.
Zigbee Devices: Ensure there is an available Zigbee gateway device in the home and it is online. Power off and then power on the device for over 10 seconds. Press and hold the reset button on the device for about 5 seconds until the device indicator light starts flashing, indicating the device is in pairing mode.
Wired Devices: Ensure the phone and device are on the same network. Power off the device for over 10 seconds, then power it back on. Press and hold the reset button on the device for 5 seconds until the indicator light stays on, indicating the device is in pairing mode.
Lighting Devices: Toggle the device power switch three to five times (on-off-on-off-on) until the light starts flashing, indicating the device is in pairing mode. Ensure there is a 2-4 second interval between each switch.